Shop

palomar starlux crystal large
PALOMAR STARLUX 300, STARLUX 500 LIGHT FILTER CRYSTAL, LIGHT GUIDE Large Y,R
IPL SAFETY EYEWEAR GOGGLES, LASER PROTECTION GLASSES, IPL 200-1200 NM | FITOVER FRAME
Show all
palomar 1064 flash lamp

PALOMAR STARLUX 500 1064 HANDPIECE FLASH LAMP

$375.00


Palomar StarLux 500 1064 Hand Piece Flash Lamp

CALL FOR PRICING 855-527-3700

Description

Package contains a Palomar StarLux 500 1064 Handpiece Flash Lamp.

This is a Replacement Flash Lamp for the Palomar StarLux 500 handpiece.
This flash lamp is compatible with the following handpieces:
  • Lux 1064

Palomar Flash Lamp Information

The flash lamp for Palomar machines are generally found in the handpiece itself. The components work in harmony in order to deliver the laser or IPL from the handpiece onto the skin. The flash lamp charges the handpiece, the flow tubes provide protection for the lamp while the pump pushes water around the tube to cool the system while protecting the lamp. The laser or IPL goes through the rod and sometimes specific filters to which determines what treatments can be performed. The optics provide a clear path for the IPL or laser to reach the skin. If any of these components are broken, it can cause other components to get damaged. For example, if the flow tube is broken, this will leak water to the flash lamp and often to the entire machine. In this instance it is very likely that a new flash lamp will be needed. If dust somehow gets inside these components, it can cause burns inside the handpiece and damage numerous parts at once. Dropping the handpiece can also cause the lamp to break. If you notice a significant decrease in power, this can mean that the laser is no longer efficient or effective enough and needs to be replaced. Lastly, overuse can cause overheating. The water circulating gets hot, while there is a set temperature that these components can withstand before cracking, as several of them are made from glass or other breakable material. Faulty power supply or capacitor can cause electrical imbalances in your machine, which can damage or burn the flash lamp, but this is less likely, as the machine will in most instances give you a HVPS (High Voltage Power Supply) error.

Flash Lamps Found Inside A Laser Head In the Machine

Flash lamps found inside the machine with a laser head component built in the machine create energy to the desired setting and then fire that energy into the other components of the laser head, such as the rod and the optics. If one of these components fails, it can cause the flash lamp to stop working. It is important note that there can be absolutely no dust get into these components, as dust can cause the laser head rod, the flash lamp, any flow tubes, and optics to burn. Excessive pressure or a leak in the laser head can also cause the flash lamp to stop working. A faulty power supply or capacitor can cause electrical imbalances in your machine, which can damage or burn the flash lamp. If you are unsure about which component needs repair or replacement, you can send your machine to us for a free diagnosis.

LaserTech is not affiliated, associated, authorized, endorsed by, or in any way officially connected with Syneron Candela or their affiliates.
Any logos and trademarks of third parties that may be found on our website are registered trademarks of their respective owners.
The use of any trademark is for identification and reference purposes only and does not imply any association with the trademark holder.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “PALOMAR STARLUX 500 1064 HANDPIECE FLASH LAMP”

Your email address will not be published. Required fields are marked *