Cynosure Laser Apogee ELITE High Voltage Power Supply

CYPS1727

LaserTech offers a great solution for your Cynosure power supply.
We have 3 options that can fit your needs:

• Buy a brand new power supply.
• Swap your power supply with one of our rebuilt power supply (fully tested and working).
• Send your power supply to us and we will rebuild it for you.

This power supply will fit the following Cynosure machines:

• Apogee ELITE Family
• ELMD
• ELITE PLUS

Cynosure High Voltage Power Supply Important Information

Failure to send your machine for routine maintenance every 6-12 months can cause several issues with your machine and power supply. Here is how it works. The High Voltage Power Supply is responsible for providing energy to your laser or IPL machine. This energy feeds the components, enabling them to perform a needed treatment. If the machine components have become dusty or they have been worn down due to extensive use or mishandling, or the flash lamp has been worn down to the point where it does not hold same energy, the power supply will need to work harder in order to compensate. If your power supply continues to work harder in order to compensate for issues in other components, it will eventually seize to work.

How Do I Know When The Power Supply is Not Working?

Your machine will usually give you an error to inform you that the power supply is no longer operating properly. This message usually reads, “HVPS,” which stands for High Voltage Power Supply. We strongly recommend routine maintenance in order to avoid costly repairs and replacement parts. If you have any questions regarding your power supply, feel free to give us a call. We’ll be happy to help you.

LaserTech is not affiliated, associated, authorized, endorsed by, or in any way officially connected with any equipment manufacturer or their affiliates. Any logos and trademarks of third parties that may be found on our website are registered trademarks of their respective owners. The use of any trademark is for identification and reference purposes only and does not imply any association with the trademark holder.