CANDELA PRO ALEX LASER HEAD 7122-00-9572 CALH3435 WITH TWO FLASH LAMPS AND ROD

Laser-Tech guarantees all of our products to be of the highest quality at very competitive prices.

CANDELA PRO ALEX   LASER HEAD 7122-00-9572 WITH TWO FLASH LAMPS AND ROD

CALH3435

Candela GentleLASE Pro Laser Head packaged and ready for fast delivery.

Laser-Tech offers a great solution for your Candela laser head.
At Laser-Tech we completely rebuild your laser head or we also offer a core replacement. Laser-Tech recommends to rebuild your laser head when you get some of these symptoms:

• When your system setting can not achieve the setting and the power you request.
• When you hear a thumping sound or when you do not get enough speed and energy during treatment.

Our rebuilding service for the laser head will include the following procedure:

Replacing:

• New flash lamps
• Replacement triple bore
• New seal kit include all o-rings
• Replacement light blocking kit
• New flow tubes
• Applying and re-coating with reflective powder.

1. Swap your laser head with one of our previously rebuilt laser heads (fully tested and working).
2. Send your laser head to us and we will rebuild it for you.

In addition, we carry Yag and Alex laser heads, and if you also need a laser rod we can supply this

laser-tech.com/shop/candela-laser-gentlelase-pro-rod-755-alexandrite/

Candela GentleLase Pro Laser Head Information

There are several reasons why the laser head can go bad. First, a water leak in the laser head can cause pressure to build up and break the laser rod, which is a device through which the laser goes and cause the rod to crack. One singular crack can make the laser head stop working.

Secondly, there is a reason why we are adamant about the laser being in a spotless-clean environment. If there is a small spec of dust on the optics, the laser will make contact with the dust and thus gradually burn your optic until the laser has nowhere to go except backwards or sideways, which can cause additional components to break. Additionally, dust can also burn laser rod, and even the laser head. It is also important to note that the flow tubes or triple bore can be damaged from water pressure or dust.

Lastly, a Candela GentleLase Pro Laser Head can malfunction or stop working altogether because of a damaged or broken flash lamp. Please pay attention to your lamp life. If you notice your power has decreased significantly, whereby you need more treatments to achieve the same result, it may be time to change your flash lamp.

In order to extend the life of your laser machine, we recommend a preventative maintenance service on your machine every six months. This will help ensure the safety of your patients, your investment, and your business, as a broken machine can cause delays and inability to follow through on advertised services or scheduled appointments.

Laser-Tech  is not affiliated, associated, authorized, endorsed by, or in any way officially connected with Candela their affiliates. Any logos and trademarks of third parties that may be found on our website are registered trademarks of their respective owners. The use of any trademark is for identification and reference purposes only and does not imply any association with the trademark holder.

Laser-Tech distributes directly to end users, medical spas, and dermatology and plastic surgery practices.

By purchasing this item, you agree to our terms and conditions.

Sold and supported by Laser-Tech LLC, Miramar, FL. Questions about fit or compatibility? Call 855-527-3700 or email sales@laser-tech.com.