CYNOSURE DEKA SYNCHRO REPLA:Y LASER MACHINE

Technical Data

This brochure is not intended for the market of USA.

0123

DEKA M.E.L.A. s.r.l.- All rights reserved – In order to improve its products the company reserves the right to modify these specifications without prior notice. Document Reserved for Health Professionals Only.

Moveo Handpiece Laser Type Alexandrite (main recommendation).

Also suitable for Nd:YAG

Wavelengths 755 nm (main recommendation) & 1064 nm

Fluence Range Up to 8 J/cm2

Frequency Up to 10 Hz

Pulse Structure 3 simple pulses: Soft, Medium, High

Sapphire Tip Diameter 20 mm

Software Integrated clinical database

Laser Handpiece Cooling Integrated contact skin cooling

Weight approx. 280 g.

FT Pulsed Light Handpiece (Optional for All Synchro REPLA:Y Models) Source Xe Lamp

Spectrum of Emission 500-680 nm & 850-1200 nm; 520-1200 nm; 550-1200 nm; 600-1200 nm; 650-1200 nm..

Energy per Pulse 156 J (max.) Pulse Duration Single Pulse from 3 to 20 ms. Multipulse from 3 to 8 ms

Delay between Pulses From 5 to 50 ms

Total Pulse Length From 3 to 124 ms

Number of Pulses Up to 3

Repetition Rate 2 seconds (min.)

Treatment Area 48 x 13 mm (6.2 cm2). 23 x 13 mm (3.0 cm2) (Optional)

Fluence Up to 25 J/cm2

Skin Cooling Integrated Sapphire Cooling

General System Specifications

• Models Premium 2.4.2 and 1.4.2,
• Excellium 3.4 and HP
• Aiming Beam for Lasers Green Diode Laser @ 532 nm – 4 mW
• Emission Control Fingerswitch or footswitch
• Laser Handpiece Cooling Integrated Skin Cooling
• Protocols Database More than 300
• Dimensions 120 (H) cm x 49 (W) cm x 100 (D) cm
• Weight 150 kg
• Electrical Requirements
• 230 Vac – single phase 50/60 Hz; 32 A

LaserTech is not affiliated, associated, authorized, endorsed by, or in any way officially connected with Syneron Candela or their affiliates.
Any logos and trademarks of third parties that may be found on our website are registered trademarks of their respective owners.
The use of any trademark is for identification and reference purposes only and does not imply any association with the trademark holder.